You are here: Home > Timer Delay Relays
Choose a sub category:
12VDC 120VAC 24VDC
240VAC Socket Accessories

</strong// // / / / / />EZSeries Text</strong>panels</strong// // / / / / />EZSeries Text</strong>panel

Say Goodbye to Knobs, Pots, and Hundreds of Different Timers!

Introducing the New Digital Programmable Timed Delay Relay (TDR) Starting at $29.99

EZ Timer, all digital programmable timers offer flexible features at a great price. The large, bright red LED display has a 12 mm character display height. No knobs, only digital settings to 1% resolution, 1% absolute accuracy and 0.1% repeat accuracy, so operation is easy. Widest Time delay ranges from 0.01 sec to 999 hrs. Password protection/security is available to avoid tampering with the settings.

Four Programmable Modes of Operation

T 1 : Delay On Make / Timed On Delay

This type of operation indicates that the timer delay (SP) begins as soon as the input power at operating voltage (V) is supplied. The Relay (R) output is energized only at the end of the time delay and then it remains energized as long as input power is supplied. The timer and the Relay output are Reset on loss of power.



T 2 : Single Shot Timer

Input Power (V) must be applied to the timer before and during timing.
Being Positive edge-triggered, the Relay (R) output is energized upon momentary or maintained closure of the switch (S1). The energized Relay also triggers the time delay (SP). When the timer finishes timing, the Relay de-energizes.





T 3 : Delay On Break / Timed Off Delay

Input Power (V) must be applied to the timer before and during timing.
When the switch (S1) is closed, the Relay (R) output is energized. The time delay begins when the switch is opened (Negative edge triggered) and the output remains energized during timing. The output is de-energized at the end of the time delay.



CYCLE : Cycle Timer

When input power is applied at startup, the Relay output is energized and the TON timer begins. At the end of the TON time, the output de-energizes and the TOF time begins. At the end of the TOF time, the output is re-energized and the cycle repeats as long as power is applied.