 |
 |
 |
|
2 Line x 20 character LCD Display with DeviceNet, Screw-down I/O
This model is obsolete. Please call EZAutomation at 877-774-3279 (EASY) for possible replacement.
- Power Consumption: 16.5 Watts @ 24VDC
- Processors: 32 Bit, 40 MHz RISC Processor (PLC), 8 Bit Processor (HMI)
- Total PLC Memory: 64 KB (Ladder)
- # of PLC Registers: 8192 16Bit
- PLC Typical Scan Time: 3ms (1K Boolean)
- Real Time Clock/Calendar: Built-in
- Built-In Battery Backup: Yes, Lithium coin cell battery with 5 year life expectancy, with a low battery indicator
- PLC LED Indicators: Input Power, CPU Status (Run, Program & Run/Program) Low Battery, Program PLC, Program Panel and Run LED indicators
- I/O Supported: EZIO modules with status LEDs and Removable Terminal Block - DC / AC / Analog / Relay / Thermocouple / High Speed Counter
- Electrical Noise: Nema ICS 2-230 Showering arc; ANSI C37.90a SWC; Level C Chattering Relay Test
- Withstand Voltage: 1000VDC (1 minute) between power supply input terminal and protective ground)
- Insulation Resistance: Over 20M Ohm between power supply input and terminal and protective ground
- Operating Temperature: 0C to 45C
- Storage Temperature: -20C to 60C
- Vibration: 5 to 55Hz 2G’s for 2 hours in X,Y,and Z axis
- Shock: 10G for under 12ms in the X,Y, and Z axis
- Humidity: 10-95% Non-Condensing
- Protocols Supported: ASCII In/Out; EZ Protocol, Ethernet, DeviceNet Slave, and Profibus Slave
- Built-In Serial Comm. Ports - Port 1: RS232 (Programming and HMI Port Only)
Port 2: RS422 (1.2K, 2.4K, 4.8K, 9.6K, 19.2K, and 38.4K Baud Rates supported) - Agency Approval: UL, CUL, CE (pending)
- External Dimensions: 10.018” x 5” x 2.587” (254.46 x 127 x 65.71mm)
- Weight: 1.7 lbs
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- DeviceNet Slave comm interface
- Nema 4,4x (indoor) enclosure
- Numeric Keypad, Five User Defined Pushbuttons and Four Control Pushbuttons
- 256 programmable messages with up to 2 embedded read only data points and 1 read/write data point per message
- High performance PLC with RS422/ASCII port
- Real time clock/calendar
- 3 ms scan time for 1K instructions (typical)
- 6 slots for EZIO Snap-in modules for a total of 48I/O Max (modules sold seperately)
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
