EZPLCP Screw-down 4 Slot Base

Home > PLC
(Programmable Logic Controllers) >

EZPLCP Screw-down 4 Slot Base - EZPLCP-D-32E

Price: $436.00

Stock Status:In Stock

Product Code: EZPLCP-D-32E

Qty:

Description

Technical Specs

Documentation

4 Slot EZPLCP Base (32I/O Max) Ethernet, 24 VDC Power Input

Power Supply Capacity: 3.3V @ 1 Amp
CPU & Support Electronics Power: 300mA
I/O Module Power: 25mA
DeviceNet/Profibus Interface Power: DeviceNet 50mA, Profibus 100mA
Maximum Power Consumption: 10 watts
CPU Processor: 32 Bit, 40 MHz RISC Processor
Total Memory: 64 KB (Ladder)
Total # of Registers: 8192 16Bit
Typical Scan Time: 3ms (1K Boolean)
Real Time Clock/ Calendar: Built-in
Battery Backup: Yes, Lithium coin cell battery with 5 year life expectancy, with a low battery indicator
LED Indicators: Input Power, CPU Status (Run, Program & Run/Program) , Low Battery and RS232 Programming Port active indicators
I/O Supported: EZI/O Snap-in modules with status LEDs and Removable Terminal Block: DC / AC / Analog / Relay / Thermocouple / High Speed Counter / DeviceNet / Profibus
Operating Temperature: -10C to 60C
Storage Temp.: -20C to 70C
Humidity: 10-95% Non-Condensing
Electrical Noise: Nema ICS 2-230 Showering arc; ANSI C37.90a SWC; Level C Chattering Relay Test (pending)
Agency Approval: UL, CUL, CE (pending)
Withstand Voltage: 1000VDC (1 minute) between power supply input terminal and protective ground)
Insulation Resistance: Over 20M Ohm between power supply input and terminal and protective ground
Vibration: 5 to 55Hz 2G’s for 2 hours in X,Y,and Z axis
Shock: 10G for under 12ms in the X,Y, and Z axis
Protocols Supported: ASCII In/Out on RS422/485 port; EZ Protocol on Ethernet and RS232 port
DeviceNet Slave option card (EZPLC-DeviceNet), and Profibus Slave option card (EZPLC-Profibus)
Communication Ports - Standard Model:
Port 1: RS232 (Programming and HMI Port Only with EZ Protocol)
Port 2: RS422 (1.2K, 2.4K, 4.8K, 9.6K, 19.2K, and 38.4K Baud Rates supported) ASCII In/Out
Communication Ports - Ethernet Model:
Port 1: RS232 (Programming and HMI Port Only with EZ Protocol)
Port 2: RS422 (1.2K, 2.4K, 4.8K, 9.6K, 19.2K, and 38.4K Baud Rates supported) ASCII In/Out
Port 3: Ethernet TCP/IP with EZ Protocol for programming or interface to an HMI
External Dimensions: 5.75” x 4.868” x 3.124” (146.05 x 123.65 x 79.356mm)

Accessories for this product...

RS422/485 Terminal Block - EZPLC-TERM5

EZPLC Programming Software CD - EZPLC-EDIT

WiFi Module - EZ-WIFI

Replacement PLC Battery - EZPLC-BAT

Price: $17.00

Add

Price: $137.00

Add

Price: $206.00

Add

Price: $45.00

Add

	High Speed Counter Module (2 encoders) - EZIO-HSCM1 $206.00
	EZ-CBL-25PIN-15PIN $39.00
	EZSeries TextPLC Screw-down I/O - EZP-420-PLC $551.00
	EZSeries TextPLC Screw-down I/O w/Ethernet - EZP-420-PLC-E $666.00
	4 Channel RTD Input Module PLUS - EZIOP-4RTD $286.00
	HMI Runtime Software Single User License - EZ-SOFTHMI $769.00
	8" EZTouch Slim Bezel Template - EZ-8TEMPLATE $16.00
	Pulse Width/Pulse Train Module EZIOP-PWM-P $286.00